SagarAIMARINE VISION SYSTEMS
  1. Home
  2. Products
  3. Components

CAT · Components 2026

Component catalogue

Camera heads, stabilised mounts, edge modules, harnessing, calibration equipment and licensable software modules — for integrators building their own system around our parts.

Buy the whole system, or buy the parts.

Some customers want DRISHTI-360 as delivered. Others — particularly the defence PSUs and yards integrating into an existing combat management system — want the heads, the mounts and the detection module, and will build the console themselves. Both are fine.

  • Every head ships calibrated. Factory calibration file and traceable optical test record included.
  • Documented interfaces. Full ICD supplied before purchase, not after.
  • No lock-in on compute. Software modules build to ONNX and TensorRT; run them on our node or yours.
  • Spares held in India. Because a six-week lead time from Europe is not a spares policy.

CAT-SV

SV-Series camera heads

Marine-qualified imaging heads. Every head ships with a factory calibration file and a traceable optical test record.

SV-Series camera heads · CAT-SV
CodeItemSpecificationPhysical
SV-12Low-light colour1/1.8″ back-illuminated CMOS, 0.0001 lux colour, 1920×1080 at 60 fps, GMSL2IP68, 0.42 kg
SV-18Wide low-lightSame sensor, 118° HFOV marine lens, hydrophobic front elementIP68, 0.46 kg
SV-24SWIRInGaAs 640×512, 0.9–1.7 µm, haze and thin-fog penetrationIP67, 1.15 kg
SV-32Uncooled LWIRVOx 640×512, 12 µm pitch, NETD <40 mK, shutterlessIP68, 0.62 kg
SV-40Cooled MWIRMCT 640×512, 15 µm, integrated dewar cooler, continuous zoomIP67, 4.8 kg
SV-50Underwater stereo2 × 4K global shutter, sapphire port, 300 m depth ratedIP68/300 m, 2.4 kg

CAT-PT

PT-Series stabilised mounts

Pan-tilt and gimbal assemblies rated for shipboard vibration and continuous duty in salt atmosphere.

PT-Series stabilised mounts · CAT-PT
CodeItemSpecificationPhysical
PT-1Pan-tilt, unstabilised360° continuous pan, ±90° tilt, 0.02° repeatability, 12 kg payloadIP66, 8.5 kg
PT-2G2-axis gyro-stabilised<25 µrad RMS residual at SS4, 60°/s slew, 20 kg payloadIP66, 19 kg
PT-4G4-axis gyro-stabilisedCoarse + fine stabilisation stages for long focal lengthsIP66, 34 kg
PT-R12Fixed panoramic ring12-position rigid rig for DRISHTI-360, factory-calibrated as one unitIP67, 6.2 kg

CAT-EN

EN-Series edge nodes

See SETU-EDGE for the full product. Component-level variants for OEM integration.

EN-Series edge nodes · CAT-EN
CodeItemSpecificationPhysical
EN-6060 TOPS moduleSoM-format inference module, conduction-cooled, 25 WCarrier-board mount
EN-120120 TOPS moduleDual-die inference module, conduction-cooled, 55 WCarrier-board mount
EN-CB1Marine carrier board12 × GMSL2 in, 2 × 10 GbE, isolated 24 V input, conformal coated160 × 110 mm
EN-PSUMarine power conditioner18–36 V in, EN 60945 transient suppression, 200 WDIN rail

CAT-HB

HB-Series harnessing

Marine-grade interconnect. Because in practice, more shipboard vision installations fail at a connector than at a model.

HB-Series harnessing · CAT-HB
CodeItemSpecificationPhysical
HB-C6AArmoured Cat6AShipboard-rated, LSZH, armoured, 90 m qualified runPer metre
HB-GMGMSL2 coax harnessFakra-Z terminated, 15/30/60 m, salt-fog qualifiedPer assembly
HB-JB8Deck junction box8-way, IP68, gland-sealed, cathodic-isolated1.9 kg
HB-SPDSurge protectionEthernet and 24 V line surge arrestors for masthead runsDIN rail

CAT-CB

CB-Series calibration & test

Calibration and acceptance-test equipment, because a perception system is only as trustworthy as its last verified calibration.

CB-Series calibration & test · CAT-CB
CodeItemSpecificationPhysical
CB-TGTMulti-band target setVisible/LWIR/MWIR resolution and radiometric targetsCase, 11 kg
CB-RIGRing calibration jigBench jig for DRISHTI-360 extrinsic verificationBench, 24 kg
CB-SIMSea-state playback rigHardware-in-loop replay of recorded sea scenes for acceptance test19″ 4U
CB-LOGTrials data recorderSynchronised multi-channel capture with GNSS/IMU time baseIP65, 3.4 kg

CAT-SW

SDK & software modules

Licensed software components for integrators building their own console or combat management interface.

SDK & software modules · CAT-SW
CodeItemSpecificationPhysical
SW-DETDetection moduleMarine object detection, 14 classes, ONNX and TensorRT buildsPer-node licence
SW-TRKTracking moduleMulti-hypothesis tracker with re-identification across occlusionPer-node licence
SW-FUSFusion moduleCamera, radar, AIS and GNSS association into unified tracksPer-node licence
SW-RULCOLREG rule engineRule-cited give-way reasoning with audit log outputPer-vessel licence
SW-GEOGeo-registrationHorizon-geometry range and true-bearing estimationPer-node licence
SW-SDKIntegration SDKC++, Python and gRPC bindings, plus reference console sourcePer-site licence

Ordering

How to specify a build.

Send us the platform, the mounting position, the cable run length and the decision you need supported. We return a bill of materials, an interface control document and a lead time. For defence programmes we will also map the build against the applicable indigenous content requirement.

Start a conversation

Bring machine sight to your hull, yard or fleet.

Send us your operating profile and we will come back with a sensor plan, an integration route and a trials schedule — usually within two working days.

Call us directly Rahul Kaushik Sharma · Founder & CEO
+91 89496 96157